-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueCreating a Culture of Collaboration
PCB designers could learn quite a bit from NASA and the private companies that develop spacecraft: Every one of these vehicles is a testament to the value of collaboration among disparate stakeholders. Without a collaborative culture, the rocket might never get off the ground.
Breaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 1 minute
Beyond Design: Stackup Planning, Part 1
The PCB substrate that physically supports the components, links them together via high-speed interconnects and also distributes high-current power to the ICs is the most critical component of the electronics assembly. The PCB is so fundamental that we often forget that it is a component and, like all components, it must be selected based on specifications in order to achieve the best possible performance of the product. Stackup planning involves careful selection of materials and transmission line parameters to avoid impedance discontinuities, unintentional signal coupling and excessive electromagnetic emissions.
The complexity of electronics design is undoubtedly going to increase in the future, presenting a new set of challenges for PCB designers. Materials used for the fabrication of multilayer PCBs absorb high frequencies and reduce edge rates, thus putting the materials selection process under tighter scrutiny. Ensuring that your board stackup and impedances are correctly configured is a good basis for stable performance.
So where do we start? Over the years, I have found that many engineers and PCB designers do not understand the basic structure that makes up a substrate. We all know that multilayer PCBs consist of signal and plane layers, dielectric material and soldermask coating, but there is a lot more to it.
The most popular dielectric material is FR-4 and may be in the form of core or prepreg (pre-impregnated) material. The core material is thin dielectric (cured fiberglass epoxy resin) with copper foil bonded to one or both sides. For instance: Isola's FR406 materials include 5, 8, 9.5, 14, 18, 21, 28, 35, 39, 47, 59 and 93 mil cores. The copper thickness is typically 1/3 to 2 oz. (17 to 70 µm).
The prepreg (B-stage) material is comprised of thin sheets of fiberglass impregnated with uncured epoxy resin which hardens, when heated and pressed, during the PCB fabrication process. Isola’s FR406 materials include 1.7, 2.3, 3.9 and 7.1 mil prepregs that may be combined to achieve thicker prepreg.
To read this article, which appeared in the June 2015 issue of The PCB Design Magazine, click here.
More Columns from Beyond Design
Beyond Design: Dielectric Material Selection GuideBeyond Design: The Art of Presenting PCB Design Courses
Beyond Design: Embedded Capacitance Material
Beyond Design: Return Path Optimization
Beyond Design: Just a Matter of Time
Beyond Design: Design Success with IPC Standards
Beyond Design: Integrating AI Into PCB Design Flow
Beyond Design: Standing Waves in Multilayer PCB Plane Cavities